SMT 600 Series coolant rotary unions are used for machine tool applications . These coolant rotary unions feature balanced Silicon Carbide face seals and deep groove radial contact ball bearings having labyrinth seal protection.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SMT 500 Series coolant rotary unions are used for machine tool applications . These coolant rotary unions feature balanced Silicon Carbide face seals and designed for without bearing for high speed and cooling system is there for sealing Faces.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SMT 400 Series coolant rotary unions are used for machine tool applications . These coolant rotary unions feature balanced Silicon Carbide face seals and without bearing for high speed.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SMT 300 Series coolant rotary unions are used for machine tool applications . These coolant rotary unions feature balanced Silicon Carbide face seals and deep groove radial contact ball bearings having labyrinth seal protection.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SMT 200 Series coolant rotary unions are used for machine tool applications . These coolant rotary unions feature balanced Silicon Carbide face seals and deep groove radial contact ball bearings having labyrinth seal protection.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SMT 100 Series coolant rotary unions are used for machine tool applications . These coolant rotary unions feature balanced Silicon Carbide face seals and deep groove radial contact ball bearings.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SHP 300 is multi passage, flange mount rotary unions feature a shaft, through bore to accommodate electrical slip rings, a hardened/ Ceramic coated shaft, deep groove radial contact ball bearings and Bronze Teflon Seals.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SHP 200 is multi passage, flange mount rotary unions feature a shaft, through bore to accommodate electrical slip rings, a hardened/ Ceramic coated shaft, deep groove radial contact ball bearings and Bronze Teflon Seals.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

SHP 100 series is dual port air / hydraulic rotary joints are designed for applications such as expanding mandrel drums on coil processing equipment. This rotary union uses a hardened shaft & ball bearings and is able to withstand high pressures at low speeds.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.

6000 series is High flow rate rotary union having balanced mechanical seal design with single spring specially designed for Steam and water. This Design is used in textile, printing, packaging, steel , etc.

This design available in different housing material , Shaft material and connection options.

The temperature and pressure ranges are limited as per standard conditions. If a different range is required, please contact SINGH FLO-EK.